B-TEK Scales | Greenville Scale Company provides sales and service for B-TEK Scales, Floor Scales and Drum Scales, including calibration, repair, maintenance, sales and installation to the Carolinas and Georgia.

B-TEK 4-Square Floor Scale
The B-TEK 4-Square floor scale offers a well constructed platform for use in warehouses, commercial facilities and light industrial locations. The NTEP approved platform features mild steel construction, tread plate decking, top access junction box and a tough two-component epoxy paint.

Precision alloy steel load cells and adjustable leveling feet can maintain scale performance on rough or uneven mounting surfaces. The sealed junction box and IP67 rated load cells allow the scale to be used inside or outdoors. The standard 48" x 48" platform is the most common size produced for industry.

B-TEK Clydesdale Floor Scale
The Clydesdale floor scale is designed for use in variety of industrial, commercial and agricultural applications. The scale is available (non-trade approved) with a platform size from 1.5' x 1.5' to 10' x 10' with capacities from 500 to 30,000 lbs.

NTEP (trade approved) platform sizes range from 2' x 2' to 8' x 10' with capacities form 2,500 to 20,000 lbs. B-TEK excels in the ability to design and build the Clydesdale for applications beyond the normal, everyday warehouse scale. Custom sizes and capacities are available upon request.

B-TEK Workhorse Floor Scale
The B-TEK Workhorse platform scale is designed for the most extreme industrial weighing applications. Heavy and frequent material handling vehicle traffic, highly concentrated loads such as steel billets are no problem for the Workhorse. The Workhorse is constructed with wide flange beams and heavy tread plate decking to form a robust weighing platform.

The Workhorse is available with capacities from 20,000 to 40,000 lbs. The Workhorse can be mounted above ground or in a pit foundation. B-TEK prides itself in the ability to customize weighing platforms to meet unique requirements so the straight forward scale design of the Workhorse allows almost unlimited platform customization.

B-TEK Drum Scale
The B-TEK Drum Scale is designed with a low-profile weighing surface. The deck height makes this scale ideal for use with pallet jacks, dollies, wheeled carts and storage drums rolled on end. The scale is available in epoxy painted mild steel and 304 stainless steel.

The Drum Scale can be supplied with built-in or detachable ramps, indicator column and wheeled portability kits. The simple, robust design of the scale allows for adaptability in many different types of industrial applications and environments.

Centurion Truck Scale
The Centurion from B-TEK Scales is the only vehicle weighing system of its kind available, offering the latest digital technology in a unique, modular design. It's the most robust scale on the market, utilizing tread plates that are 20% thicker than all standard scales in its class. Its durable construction is designed for long life in tough environments. Providing 10 lb. graduations, the Centurion is the most accurate truck scale available.

B-TEK's Centurion is designed with enhancements specifically tailored to make service and calibration easy and efficient:

14" end wall clearance - prevent dirt, debris and ice from building up and interfering with the scale's operation
Hermetically sealed stainless steel (IP68/69K) load cells – Ultimate protection from harsh weather environments
Large top access covers - each load cell is accessible for easy installation, calibration and service
Dual calibration storage - download the calibration from the indicator to the laod cells or upload from the load cells to the indicator, providing speedy plug-and-play replacement
Nexia™ remote monitoring - provide full insight into scale performance through detailed health monitoring and event notifications

Greenvile Scale Company provides sales, service, installation and calibration for B-TEK truck scales as well as all types and manufacturers of truck scales. Please visit our Truck Scales page for more information on these services.

Industrial Bench Scale / 12" x 12" / 5 lb
The B-TEK Industrial Bench Scale features rugged, heavy-duty construction to ensure long-term performance and service life. The B-TEK Industrial Bench Scale is designed for high performance and reliability in a variety of Industrial applications, including general purpose weighing, check-weighing, bagging, packaging, and other high accuracy industrial weighing applications.

WorldWEIGH Portion WD Bench Scale - 6 lb
The WorldWEIGH Portion WD Bench Scale is ideal for the food industry with its compact size and IP65 washdown capabilities. It fits perfectly on food service counters or crowded production lines. The WorldWEIGH Portion WD Bench Scale is available in three capacities and offers standard weighing applications such as checkweighing, parts counting, and animal weighing.

Rail Track Scale
The B-TEK Rail Scale can weigh a variety of car sizes efficiently without compromising accuracy. This scale is ideal for bulk cement, aggregate, grain, scrap metal and chemical applications.

Sectional Capacity: NTEP rated at 170,000 lb
Modular Design of scale allows weighing of a wide range of rail cars
Foundation anchor bolts and grout plates included
Anti-creep devices included for rail on scale and approaches
360° positive self-checking eliminates the need for flexure plates or adjustable check rods
NTEP-approved, environmentally-protected load cells
NEMA 4X junction boxes are supplied
Weighbridge design meets AAR (Association of American Railroads) and AREMA (American Railway Engineering and Maintenance-of-Way Association) standards

Greenvile Scale Company provides sales, service, installation and calibration for B-TEK scales as well as all types and manufacturers of rail and train scales. Please visit our Rail Scales page for more information on these services.

Service Request

Serving SC, NC + GA